Neutral HCF



Spray method
Spray the hot tank surfaces with undiluted Neutral HCF until the surfaces are well soaked and let the product act for at least 30 min. Then rinse all tank surfaces with water at max. 60°C for 45 minutes.


Hydrocarbonfree cleaning
Hand spray Neutral HCF on the hot tank surfaces and let it act for 30 minutes.
Rinse thoroughly with hot chloride free water when cleaning is completed. If fresh water is used, steam tanks afterwards to remove any chlorides which may cause delay in passing the chloride test for methanol etc.


Neutral colourless liquid with a characteristic odour. Completely miscible with sea water and fresh water. Suitable for use on zinc-silicate coatings and most common metals. Limited application on epoxy coatings (maximum concentration 10% and maximum temperature 60°C)
Specific gravity (20%) : 0.99
Flash point PM CC : >62 °C
pH (1% solution) : 7.0

    For More Details Contact Us